Just cruising, effortlessly. Preferably, through powder. With Kore 93 W you can. Your first freeride adventures will leave lasting impressions, and you will crave more. Thanks to the mounting point of the binding, you'll turn effortlessly without too much power output. Furthermore, the centre width increases with the length of the ski, making every ski unique - just like you.
It also makes it the perfect companion for touring: it's a very light ski and excellent for ski tour descents. But it's performance on the piste is no less stellar. To sum up: with Kore 93, you feel right at home in any terrain.
The revolutionary construction has been topped with a polyester fleece instead of a standard top-sheet. This topless Tech construction results in the lightest ski in its category. The triaxle weave of its carbon layer provides additional torsional rigidity for supreme responsiveness and solid edge hold.
LIGHTNESS
The Graphene fused tip and tail allows us to reduce and redistribute weight throughout the ski. The thinner profile enhances flotation in soft snow and maximizes manoeuvrability.
FLOTATION
While the shock absorbing Koroyd gives the skier precise control in variable terrain, the ski provides strong torsional stiffness and great stability
GRAPHENE
GRAPHENE is the strongest, lightest material known to man. We fuse it into the KORE‘s tip and tail to make it lighter and more responsive in deep snow.
KOROYD
KOROYD is a honeycomb shaped material at the heart of the KORE. It‘s super-light and incredibly elastic. It‘s strong and flexible and what makes the KORE special.
KARUBA
KARUBA wood core is what gives the ski its pop and personality. It‘s the perfect ratio of density and weight. The advantages of combining Karuba, Koroyd, and Graphene enhance the ski, making it light and balanced.
PRODUCT FEATURES
Graphene-KOROYD-Carbon Sandwich Cap Construction, KARUBA
Light Weight Wood Core, Topless Tech, Structured UHM C Base, Tip-Tail Rocker
FEATURES
Graphene-KOROYD-Carbon Sandwich Cap Construction
KARUBA Light Weight Wood Core
Topless Tech
Structured UHM C Base
Tip-Tail Rocker
If you would like your skis set up and waxed, please send an e-mail sales@theski-shop.co.uk after placing your order with the following information below.
Please include your name and order number. Otherwise, skis will be sent out and will require waxing and setting up at your own convenience.
Skis with bindings drilled on will be classed as used and non-returnable unless faulty.
Information & details required from you for ski setup:
- Skier's Age.
- Skiers Height.
- Skiers Weight.
- Boot brand/make & sole length in millimeters. Usually found embossed on side of heels. eg 315mm
- Skier classification: Please pick one: Type -1, Type 1, Type 2, Type 3, Type 3+
Type -1
Skiers looking for a lower release setting than type 1. Recommended for beginners over 25 years old.
Type 1
Ski conservatively. Prefer slower speeds. Ski on easy to moderate slopes. Intermediate level, but not in good physical fitness. Good skiers, but with smooth supple style, but emphasizing safety. Favour lower than average release/retention settings – This corresponds to increased risk of inadvertent binding release in order to gain increased release capacity in a fall.
Type 2
Intermediate skiers in good physical condition. Prefer a variety of speeds. Ski on varied terrain, including most difficult trails. All skiers who do not meet all the descriptions of the other types.
Type 3
Ski aggressively. Normally ski at high speeds. Prefer moderate to steep terrain. Favour higher than average release/retention settings. This corresponds to decreased capability to release in a fall in order to decrease the risk of inadvertent binding release. (Type 3 should not be used by skiers of less than 22kg)
Type 3+
Very strong skiers, on challenging terrain. Skiers looking for higher release settings than type 3. N.B Skier type does not have the same meaning as skier ability. I.E, an advanced skier who skis all-terrain but is not particularly aggressive may be able to use type 2 settings.
Using the boot sole length you give, we set the binding to that length, but the final adjustments and checks can only be made with the actual boot. Heel and toe units on ALL boots have to conform to a certain size and shape. However, sometimes boots especially older models or well-worn ones, may vary in length compared to another stating the same measurements hence it is important that you do have them professionally double-checked. We recommend that you have your skis double-checked by your local or resort ski shop with your actual boot.